? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 1 cascadable amplifier 10 to 500 mhz rev. v2 A180 / smA180 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. electrical specifications: z 0 = 50 ? , v cc = +15 v dc parameter typical guaranteed 25oc 0o to 50oc -54o to +85oc* frequency mhz 5-600 10-500 10-500 small signal gain (min) db 16.5 16.0 15.5 gain flatness (max) db 0.3 0.7 1.0 reverse isolation db 22 noise figure (max) db 3.4 4.0 4.5 power output @ 1 db comp. (min) dbm 18.0 16.0 15.0 ip3 dbm +33 ip2 dbm +45 second order harmonic ip dbm +51 vswr input / output (max) 1.4:1 / 1.5:1 1.9:1 / 2.1:1 2.1:1 / 2.2:1 dc current @ 15 volts (max) ma 63 69 75 units features ? high reverse isolation: 22 db (typ.) ? high output power: +18 dbm (typ.) description the A180 rf amplifier is a discrete hybrid design, which uses thin film manufacturing processes for accurate performance and high reliability. this single stage bipolar transi stor feedback amplifier design displays impressive performance over a broadband frequency range. an active dc biasing network insures temperature-stable performance. both to-8 and surface mount packages are hermetically sealed, and mil-std-883 environm ental screening is available . product image ordering information part number package A180 to-8 smA180 surface mount cA180 ** sma connectorized absolute maximum ratings parameter absolute maximum storage temperature -62oc to +125oc case temperature +125oc dc voltage +17 v continuous input power +15 dbm short term input power (1 minute max.) 100 mw peak power (3 sec max.) 0.5 w ?s? series burn-in temperature (case) +125oc thermal data: v cc = +15 v dc parameter rating thermal resistance jc 45oc/w transistor power dissipation p d 0.509 w junction temperature rise above case t jc +22.9oc * over temperature performance limits for part number cA180, guaranteed from 0 o c to +50 o c only. ** the connectorized version is not rohs compliant.
? north america tel: 800.366.2266 ? europe tel: +353.21.244.6400 ? india tel: +91.80.4155721 ? china tel: +86.21.2407.1588 visit www.macomtech.com for addi tional data sheets and product information. m/a-com technology solutions inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. 2 cascadable amplifier 10 to 500 mhz rev. v2 A180 / smA180 advanced: data sheets contain information regarding a product m/a-com technology solutions is considering for development. performance is based on target specifications, simulated results, and/or prototype measurements. commitment to develop is not guaranteed. preliminary: data sheets contain information regarding a product m/a-com technology solutions has under development. performance is based on engineering tests. specifications are typical. mechanical outline has been fixed. engineering samples and/or test data may be available. commitment to produce in volume is not guaranteed. outline drawing: to-8 * ? dimensions are inches (millimeters) 0. 015 (0.38) unless otherwise specified. typical performance curves at +25c outline drawing: surface mount * outline drawing: sma connectorized * weight: 1 gram (0.04 oz.) max weight: 1 gram (0.04 oz.) max weight: 19 grams (0.67 oz.) max
|